Críochfort Spade Crimp Dúbailte Pvc-Inslithe
| Críochfort Spade Crimp Dúbailte Inslithe | ||||||||
| Méid an chábla: 0.5 ～ 1.5mm² (AWG22 ～ 16) | Imax = 19A | |||||||
| Ábhar: Copar | Ábhar inslithe: Vinyl. Níolón | Tiús ： 0.75mm | ||||||
| MÍRE UIMH | Toise (mm) | AWG | Scriú dia. | Dath | ||||
| B. | L. | F. | H. | D. | ||||
| SD 1.25-3 | 5.7 | 21.5 | 6.5 | 10.5 | 4.3 | 4 | 3.2 | Dearg |
| SDS 1.25-3.5 | 5.7 | 21.5 | 6.5 | 10.5 | 4.3 | 6 | 3.7 | |
| SDL 1.25-3.5 | 6.4 | 21.5 | 6.5 | 10.5 | 4.3 | 6 | 3.7 | |
| SDS 1.25-4 | 6.4 | 21.5 | 6.5 | 10.5 | 4.3 | 8 | 4.3 | |
| SDM 1.25-4 | 7.2 | 21.5 | 6.5 | 10.5 | 4.3 | 8 | 4.3 | |
| SDL 1.25-4 | 8.1 | 21.5 | 6.5 | 10.5 | 4.3 | 8 | 4.3 | |
| SDS 1.25-5 | 8.1 | 21.5 | 6.5 | 10.5 | 4.3 | 10 | 5.3 | |
| SDL 1.25-5 | 9.5 | 21.5 | 6.5 | 10.5 | 4.3 | 10 | 5.3 | |
| SDS 1.25-6 | 9.5 | 21.5 | 6.5 | 10.5 | 4.3 | 1/4 | 6.4 | |
| SDL 1.25-6 | 12.0 | 27.2 | 11.0 | 10.5 | 4.3 | 1/4 | 6.4 | |
| Méid an chábla: 1.5 ~ 2.5mm² (AWG16 ~ 14) | Imax = 27A | Tiús ： 0.8mm | ||||||
| SD 2-3 | 5.7 | 21.5 | 6.5 | 10.5 | 4.9 | 4 | 3.2 | Gorm |
| SDS 2-3.5 | 5.7 | 21.5 | 6.5 | 10.5 | 4.9 | 6 | 3.7 | |
| SDL 2-3.5 | 6.0 | 21.5 | 6.5 | 10.5 | 4.9 | 6 | 3.7 | |
| SDS 2-4 | 6.4 | 21.5 | 6.5 | 10.5 | 4.9 | 8 | 4.3 | |
| SDM 2-4 | 7.2 | 21.5 | 6.5 | 10.5 | 4.9 | 8 | 4.3 | |
| SDL 2-4 | 7.9 | 21.5 | 6.5 | 10.5 | 4.9 | 8 | 4.3 | |
| SDS 2-5 | 8.1 | 21.5 | 6.5 | 10.5 | 4.9 | 10 | 5.3 | |
| SDL 2-5 | 9.5 | 21.5 | 6.5 | 10.5 | 4.9 | 10 | 5.3 | |
| SDS 2-6 | 9.5 | 21.5 | 6.5 | 10.5 | 4.9 | 1/4 | 6.4 | |
| SDL 2-6 | 12.0 | 21.5 | 11.0 | 10.5 | 4.9 | 1/4 | 6.4 | |
| Méid an chábla: 2.5 ~ 4mm² (AWG14 ~ 12) | Imax = 37A | Tiús ： 1.0mm | ||||||
| SD 3.5-3 | 5.7 | 26.4 | 7.0 | 13.5 | 6.2 | 4 | 3.2 | Dubh |
| SD 3.5-4 | 8.0 | 26.4 | 7.0 | 13.5 | 6.2 | 8 | 4.3 | |
| SD 3.5-5 | 8.0 | 26.4 | 7.0 | 13.5 | 6.2 | 10 | 5.3 | |
| SD 3.5-6 | 12.0 | 28.0 | 12.1 | 13.5 | 6.2 | 1/4 | 6.4 | |
| Méid an chábla: 4 ~ 6mm² (AWG12 ~ 10) | Imax = 48A | Tiús ： 1.0mm | ||||||
| SD 5.5-3.5 | 7.1 | 24.8 | 7.5 | 13.5 | 6.7 | 6 | 3.7 | Buí |
| SDS 5.5-4 | 8.3 | 26.0 | 7.5 | 13.5 | 6.7 | 8 | 4.3 | |
| SDL 5.5-4 | 9.0 | 26.0 | 7.5 | 13.5 | 6.7 | 8 | 4.3 | |
| SD 5.5-5 | 9.0 | 26.0 | 7.5 | 13.5 | 6.7 | 10 | 5.3 | |
| SDS 5.5-6 | 9.0 | 26.0 | 7.5 | 13.5 | 6.7 | 1/4 | 6.4 | |
| SDL 5.5-6 | 12.0 | 32.0 | 12.0 | 13.5 | 6.7 | 1/4 | 6.4 | |
| SD 5.5-8 | 14.0 | 30.0 | 11.5 | 13.5 | 6.7 | 5/16 | 8.4 | |
Scríobh do theachtaireacht anseo agus seol chugainn í
